Black and white flake resin floor in an oak-framed garage, installed by Garage Upgrade

Resin floor installers covering Winchester

Resin floors for Winchester garages, outbuildings and workshops

Winchester is twenty minutes up the M3 from our Southampton base, so it is one of the areas we cover most easily: the city itself plus Kings Worthy, Alresford, Twyford, Otterbourne, Bishops Waltham and the villages of the Itchen and Meon valleys. Many garages here are attached to larger homes or sit in converted barns and outbuildings, and a bonded resin floor gives them a clean, sealed surface that suits the rest of the property.

The concrete is diamond-ground, repaired and coated in layers by our own team, so the resin becomes part of the slab rather than a coat of paint on top of it. Choose flake, solid colour, metallic or a self-smoothing pour, and get a free, no-obligation quote before anything is booked.

023 8111 2668

Get a Quote

Resin floor finishes for Winchester homes

Flake: vinyl flakes broadcast to full coverage over a pigmented base coat and sealed with a clear UV-stable topcoat, as in both garages pictured on this page. Textured, practical and the usual choice for a family garage.
Solid colour: two coats of high-build epoxy in one colour for a clean, uniform floor that suits a home gym, studio or car showroom.
Metallic: metallic pigments worked through the epoxy for a marbled, flowing finish, sealed with polyurethane or polyaspartic.
Self-smoothing: a 3–4mm poured epoxy that levels itself into a flat, glass-like surface, the right system for workshops, barns and older slabs that are pitted or out of level.

Every blend and colour is on our colour chart, and we bring samples to the survey.

Barns, outbuildings and older concrete

A good number of the floors we do around Winchester are in converted barns, stable blocks and outbuildings rather than standard garages. These often have older, uneven or damp slabs. That is fine for a resin floor as long as the preparation is right: we diamond-grind back to clean concrete, fill cracks and pits, and where moisture is coming up through the slab we apply a moisture vapour barrier epoxy primer before the colour coats. Where the slab is badly out of level, a self-smoothing system brings it back to a flat, usable floor.

Installation and timings in Winchester

Day one: diamond grinding with dust-extracted machines, edges included, then filling cracks, holes and salt pits and grinding them flush.
Day one to two: primer where needed, then the base coat and flakes or the metallic layer.
Day two to three: scrape and clean the flakes, then the clear UV-stable topcoat.
Afterwards: walk on it after 24 hours, park on it after 5 days.

A single or double garage is usually two to three days on site. Larger barns and workshops are surveyed and quoted individually.

Why resin rather than paint or tiles

Ground into the concrete, so it does not peel where you park or lift at the door.
Seals the slab and ends concrete dust for good.
Resists oil, petrol, coolant, road salt and cleaning chemicals.
Hot tyre pick-up resistant and quick to mop.
UV-stable topcoat that keeps its colour in a bright garage.

Resin flooring across Winchester and mid Hampshire

Alongside Winchester we cover Alresford, Bishops Waltham, Kings Worthy, Sutton Scotney and Stockbridge, and we are just as often in Southampton, Basingstoke and Portsmouth. See every area on our areas served page.

For the domestic garage options in more detail, see our epoxy garage flooring Winchester page. For a resin floor quote anywhere in Winchester, call 023 8111 2668 or use the form below.